How to maintain and maintain the cutting machine

Before use, check the main parts of the cutting machine and add lubricating oil; when inspecting the disassembly and assembly of the cutting machine, it is strictly forbidden to use inappropriate tools and unscientific operating methods; clean the machine every two weeks And check.

If the cutting machine is not used for a long time, all the bright surfaces must be wiped clean, coated with anti-rust oil, and covered with a plastic cover to cover the whole machine. If the automatic cutting table is out of service for more than 3 months, the anti-rust oil should be covered with moisture-proof paper; after the work is completed, the equipment should be carefully cleaned, and the exposed friction surface should be wiped clean and lubricated.

To do a good job in the daily maintenance and maintenance of the slitting machine, the following five points must be done: regular cleaning and inspection of the electrical parts, and timely removal of hidden dangers. The use of the slitting machine is completed by the slitting machine and the cross-cutting machine. Therefore, high-quality slitting knives and cross-cutting knives must be used.

The daily maintenance of the slitting machine must be in place. The criteria are smooth, clean, and clear (no dust and debris) in place to ensure that the sliding parts of the equipment are in good condition. It is a maintenance work. Regular and irregular inspections should be stopped for the rotating parts (especially real-time monitoring of vulnerable parts should be stopped). Carry out regular adjustment, regular change, commutator and make meticulous records, in order to achieve the purpose of extending the service life of the equipment.